You are on the Desktop website, Click here to go back to our mobile website
NEWS ARCHIVE
Peavey IPR 1600 DSP Out Now
Pro Mobile previously announced the introduction of the new Peavey IPR range of amplifiers and today we are happy to let you know that the IPR 1600 DSP power amplifier is now available across Europe!
Loaded with an exclusive digital signal processing suite, the IPR 1600 DSP power amplifier combines loudspeaker management with the award-winning, light weight, power and performance of the original Peavey IPR power amplifiers. The on-board digital signal processing system includes pre-set banks for popular loudspeaker types and configurations, as well as Waves® MaxxBass® psycho-acoustic processing for the first time in any power amplifier.
The IPR DSP takes users through an intuitive setup wizard to set their EQ curves, delay requirements and crossover points (full-range or full-range with sub, high pass and low pass). The setup wizard also allows for adjustment of a four-band parametric EQ and horn EQ, as well as the opportunity to specify the amount of Waves® MaxxBass® processing from 0-100%. MaxxBass uses psycho-acoustics to calculate precise harmonics that are related to the fundamental tones of sound. When these harmonics are combined, it creates the effect of deeper low frequencies.
IPR DSP users can choose from a bank of popular Peavey and generic loudspeaker types, including models from the Peavey QW, SP, EU, Impulse, PR and SSE Sanctuary Series, as well as standard 10-, 12- and 15-inch loudspeakers. Program EQ curves include rock, pop, jazz, hip hop, contemporary worship, speech and acoustic. A built-in security lock is selectable for all functions or all but volume.
Peavey IPR Series power amplifiers feature two channels and a variable-speed fan housed in a lightweight aluminium chassis. Inputs are combination ¼” jack and XLR, while outputs are combination ¼” jack and twist-lock connectors. Peavey’s exclusive DDT speaker protection with multi-point clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal and Active safeguards, all referenced on the front panel with LED indicators. The Peavey IPR DSP 1600 boasts 900 watts RMS per channel at 2 ohms and is less than 3.5Kgs.
The Peavey IPR 1600 DSP power amplifier is available now from authorized Peavey dealers priced at approximately £400 and is backed by Peavey’s free five-year extended warranty.
Loaded with an exclusive digital signal processing suite, the IPR 1600 DSP power amplifier combines loudspeaker management with the award-winning, light weight, power and performance of the original Peavey IPR power amplifiers. The on-board digital signal processing system includes pre-set banks for popular loudspeaker types and configurations, as well as Waves® MaxxBass® psycho-acoustic processing for the first time in any power amplifier.
The IPR DSP takes users through an intuitive setup wizard to set their EQ curves, delay requirements and crossover points (full-range or full-range with sub, high pass and low pass). The setup wizard also allows for adjustment of a four-band parametric EQ and horn EQ, as well as the opportunity to specify the amount of Waves® MaxxBass® processing from 0-100%. MaxxBass uses psycho-acoustics to calculate precise harmonics that are related to the fundamental tones of sound. When these harmonics are combined, it creates the effect of deeper low frequencies.
IPR DSP users can choose from a bank of popular Peavey and generic loudspeaker types, including models from the Peavey QW, SP, EU, Impulse, PR and SSE Sanctuary Series, as well as standard 10-, 12- and 15-inch loudspeakers. Program EQ curves include rock, pop, jazz, hip hop, contemporary worship, speech and acoustic. A built-in security lock is selectable for all functions or all but volume.
Peavey IPR Series power amplifiers feature two channels and a variable-speed fan housed in a lightweight aluminium chassis. Inputs are combination ¼” jack and XLR, while outputs are combination ¼” jack and twist-lock connectors. Peavey’s exclusive DDT speaker protection with multi-point clip sampling leads a protection-circuitry suite that also includes DC, Temp, Signal and Active safeguards, all referenced on the front panel with LED indicators. The Peavey IPR DSP 1600 boasts 900 watts RMS per channel at 2 ohms and is less than 3.5Kgs.
The Peavey IPR 1600 DSP power amplifier is available now from authorized Peavey dealers priced at approximately £400 and is backed by Peavey’s free five-year extended warranty.
